Power Control System IPDM E/R (with I-key)
Removal and installation
In this manual: Power Control System IPDM E/R (with I-key)
~1min read
IPDM E/R Exploded View

IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.



1. IPDM E/R cover A
2. IPDM E/R
3. IPDM E/R cover B
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.
REMOVAL
1. Remove battery. 2. Press and expand pawls (A) on lateral side of IPDM E/R cover and remove IPDM E/R (1) from IPDM E/R cover B (2).3. Disconnect the harness connector and then remove the IPDM E/R.

4. Remove IPDM E/R cover B mounting nuts (A).

5. Insert a flat-bladed screwdriver between IPDM E/R cover A (1) and IPDM E/R cover B (2), disengage pawls, and remove IPDM E/R cover A.

6. Remove IPDM E/R cover B.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?