The ambient temperature display is incorrect
• The displayed ambient air temperature is lower than the actual temperature.
Diagnosis Procedure NOTE:
Check that the symptom is not applicable to the normal operating condition before starting diagnosis. Refer to MWI-68, "INFORMATION DISPLAY : Description".
Check the ambient sensor signal circuit. Refer to HAC-56, "Diagnosis Procedure" (4WD models) or HAC-146, "Diagnosis Procedure" (2WD models).
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair harness or connector.
2.CHECK A/C AUTO AMP./PTC HEATER CONTROL UNIT CONNECTION RECOGNITION SIGNAL CIRCUITCheck the A/C auto amp./PTC heater control unit connection recognition signal circuit. Refer to MWI-62, "Diagnosis Procedure" (A/C auto amp.) or MWI-63, "Diagnosis Procedure" (PTC heater control unit).
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK AMBIENT SENSORPerform the part check for the ambient sensor. Refer to HAC-57, "Component Inspection" (4WD models) or HAC-147, "Component Inspection" (2WD models).
Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-69, "Removal and Installation".
NO >> Replace ambient sensor. Refer to HAC-92, "Removal and Installation" (4WD models) or HAC- 189, "Removal and Installation" (2WD models).