The fuel gauge indicator does not operate
Fuel gauge will not indicate from a certain position.
Diagnosis Procedure 1.CHECK COMBINATION METER OUTPUT SIGNAL 1. Connect CONSULT-III.2. Select the “Data Monitor” for the “METER/M&A” and compare the “FUEL METER” monitor value with the fuel gauge reading on the combination meter. Refer to MWI-52, "Component Function Check".
Does monitor value match fuel gauge reading? YES >> GO TO 2.
NO >> Replace combination meter. Refer to MWI-69, "Removal and Installation".
2.CHECK FUEL LEVEL SENSOR SIGNAL CIRCUITCheck the fuel level sensor signal circuit. Refer to MWI-52, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK FUEL LEVEL SENSOR UNITPerform a unit check for the fuel level sensor unit. Refer to MWI-54, "Component Inspection".
Is the inspection result normal? YES >> GO TO 4.
NO >> Replace fuel level sensor unit (main or sub). Refer to FL-6, "2WD : Removal and Installation" (MR16DDT) (2WD), FL-11, "4WD : Removal and Installation" (MR16DDT) (4WD), FL-33, "Removal and Installation" (HR16DE), or FL-51, "Removal and Installation" (K9K).
4.CHECK FLOAT INTERFERENCECheck that the float arm interferes with or binds to other components in the fuel tank.
Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-69, "Removal and Installation".
NO >> Repair or replace malfunctioning parts.