The key warning does not sound (without intelligent key)
The key warning chime does not sound, when all of the following conditions are fulfilled.
• Key inserted into the key cylinder (key switch signal ON). • Ignition switch is in ACC or OFF (ignition switch signal OFF).• Driver side door is open (driver side door switch ON)
Diagnosis Procedure 1.CHECK BCM INPUT SIGNAL 1. Connect CONSULT-III.2. Select the “Data Monitor” of “BCM (BUZZER)” and check the “KEY ON SW” monitor value. Refer to WCS- 21, "BUZZER : CONSULT-III Function (BCM - BUZZER)".
Is the inspection result normal? YES >> Replace BCM. Refer to BCS-161, "Removal and Installation".
NO >> GO TO 2.
2.CHECK KEY SWITCH SIGNAL CIRCUITCheck the key switch signal circuit. Refer to DLK-401, "Diagnosis Procedure" (Type 3) or DLK-526, "Diagnosis Procedure" (Type 4).
Is the inspection result normal? YES >> Replace BCM. Refer to BCS-161, "Removal and Installation".
NO >> Check applicable parts, and repair or replace corresponding parts.
NOTE:
To identify vehicle type, refer to DLK-357, "Information".