The seat belt reminder warning continues sounding, or does not sound
• Seat belt reminder warning sounds continuously.
Diagnosis Procedure 1.CHECK SEAT BELT WARNING LAMP 1. Turn ignition switch ON.2. Check the operation of the seat belt warning lamp in the combination meter.
Seat belt (driver side) fastened : OFF Seat belt (driver side) unfastened : ON Seat belt (passenger side) fastened* : OFF Seat belt (passenger side) unfastened* : ON
*: When getting in the passenger seat Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-69, "Removal and Installation".
NO >> GO TO 2.
2.CHECK SEAT BELT BUCKLE SWITCH SIGNAL CIRCUIT (DRIVER SIDE)Perform the check for the seat belt buckle switch (driver side) circuit. Refer to MWI-58, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE)Perform the check for the seat belt buckle switch (driver side). Refer to MWI-59, "Component Inspection".
Is the inspection result normal? YES >> GO TO 4.
NO >> Replace seat belt buckle (driver side). Refer to SB-8, "SEAT BELT BUCKLE : Removal and Installation".
4.CHECK SEAT BELT BUCKLE SWITCH SIGNAL CIRCUIT (PASSENGER SIDE)Perform the check for the seat belt buckle switch (passenger side) circuit. Refer to MWI-60, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 5.
NO >> Repair harness or connector.
5.CHECK SEAT BELT BUCKLE SWITCH (PASSENGER SIDE)Perform the check for the seat belt buckle switch (passenger side). Refer to MWI-60, "Component Inspection (Seat Belt Buckle Switch)".
Is the inspection result normal? YES >> GO TO 6.
NO >> Replace seat belt buckle (passenger side). Refer to SB-8, "SEAT BELT BUCKLE : Removal and Installation".
6.CHECK OCCUPANT DETECTION UNITPerform the check for the occupant detection unit. Refer to MWI-61, "Component Inspection (Occupant Detection Unit)".
Is the inspection result normal?
YES >> Replace combination meter. Refer to MWI-69, "Removal and Installation".
NO >> Replace seat cushion trim and pad. Refer to SE-21, "SEAT CUSHION : Disassembly and Assembly" (2WD) or SE-29, "SEAT CUSHION : Disassembly and Assembly" (4WD).