Body Exterior, Doors, Roof & Vehicle Security

Additional Service When Removing Battery Negative Terminal

4steps
~24min
2/5difficulty
Done 0 of 4
Description

When the battery is disconnected from the negative terminal, it is necessary to perform initial setting to operate automatic back door control system normally.

  • Automatic back door open/close function

  • Anti-pinch function

Work Procedure

INITIALIZATION

  1. Fully close the back door manually. (When back door is already fully closed, this operation is not necessary.)

  2. Perform automatic back door open/close operation of back door.

  3. Check for noise or malfunctioning during operation.

  4. Check that warning buzzer operates.

>>

Inspection End.