Driver Information & Multimedia

Additional Service When Replacing Audio Unit

~3min read
Description

BEFORE REPLACEMENT

When replacing audio unit, save or print current vehicle specification with CONSULT configuration before replacement.

AFTER REPLACEMENT

  • Complete the procedure of “After Replace ECU” in order.

  • If you set incorrect “After Replace ECU”, incidents might occur.

  • Configuration is different for each Nissan Murano vehicle model. Confirm configuration of each vehicle model.

Work Procedure

SAVE VIN DATA (AUDIO UNIT)

CONSULT work support

Perform “SAVE VIN DATA” to save current VIN data.

>>

GO TO 2.

SAVE “OPERATION LOG”

CONSULT

Save Operation Log, according to the procedure of “Programming” in CONSULT Operation Manual.

>>

GO TO 3.

REPLACE AUDIO UNIT

Replace audio unit. Refer to Removal and Installation.

>>

GO TO 4.

CHECK “OPERATION LOG”

CONSULT

Check “Operation Log” saved before replacing the audio unit, according to the procedure of “Programming” in CONSULT Operation Manual.

Is there an applicable Operation Log in the Saved Data List?

YES>>

GO TO 5.

NO>>

GO TO 6.

PERFORM AUDIO UNIT PROGRAMMING

CONSULT

Perform audio unit programming, according to “Programming” of CONSULT Operation Manual. Refer to CONSULT Operation Manual.

  • Ignition switch: ON

  • Electric load: OFF

  • Brake pedal: Not depressed

  • 12V battery voltage: 12 – 13.5 V (Check the value displayed on the CONSULT screen.)

>>

GO TO 8.

READ IN AUDIO UNIT PART NUMBER BY “FAST LINKED”

Obtain audio unit part number by NISSAN PARTS CATALOGUE GLOBAL Web-FAST, according to the procedure of “FAST linked” in CONSULT Operation Manual. Refer to CONSULT Operation Manual.

>>

GO TO 7.

PERFORM PROGRAMMING (FAST LINKED)

CONSULT

Perform audio unit programming according to the procedure of FAST linked in CONSULT Operation Manual. Refer to CONSULT Operation Manual.

  • Ignition switch: ON

  • Electric load: OFF

  • Brake pedal: Not depressed

  • 12V battery voltage: 12 – 13.5 V (Check the value displayed on the CONSULT screen.)

>>

GO TO 8.

CONFIGURATION (AUDIO UNIT)

CONSULT Configuration

Perform configuration. Refer to Work Procedure.

>>

GO TO 9.

WRITE VIN DATA (AUDIO UNIT)

CONSULT work support

Perform “WRITE VIN (SAVED DATA)” or “WRITE VIN (MANUAL INPUT)” to write VIN data.

>>

Work End.