Driver Information & Multimedia
Diagnosis and Repair Workflow
In this manual: Driver Information & Multimedia
2steps
~12min
1/5difficulty
Done 0 of 2
OVERALL SEQUENCE

DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred).
>>GO TO 2.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition when the symptom is detected.
>>GO TO 3.
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON and wait for 2 seconds or more.
Select “Self Diagnostic Result” mode of “MULTI AV”.
Are any DTCs displayed?
YES>>Refer to DTC Index.
NO>>GO TO 4.
PERFORM SYMPTOM DIAGNOSIS
Refer to Symptom Table.
>>GO TO 5.
FINAL CHECK
Refer to symptom described by the customer in step 1.
Is the symptom still present?
YES>>GO TO 2.
NO>>Inspection End.
Was this page helpful?