Additional Service When Replacing Av Control Unit
BEFORE REPLACEMENT
When replacing AV control unit, save or print current vehicle specification with CONSULT configuration before replacement.
AFTER REPLACEMENT
Complete the procedure of “After Replace ECU” in order.
If you set incorrect “After Replace ECU”, incidents might occur.
Configuration is different for each Nissan Murano vehicle model. Confirm configuration of each vehicle model.
SAVE VIN DATA (AV CONTROL UNIT)
CONSULT work support
Perform “SAVE VIN DATA” to save current VIN data.
>>GO TO 2.
SAVE “OPERATION LOG”
CONSULT
Save Operation Log, according to the procedure of “Programming” in CONSULT Operation Manual.
>>GO TO 3.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to Removal and Installation.
>>GO TO 4.
CHECK “OPERATION LOG”
CONSULT
Check “Operation Log” saved before replacing the AV control unit, according to the procedure of “Programming” in CONSULT Operation Manual.
Is there an applicable Operation Log in the Saved Data List?
YES>>GO TO 5.
NO>>GO TO 6.
PERFORM AV CONTROL UNIT PROGRAMMING
CONSULT
Perform AV control unit programming, according to “Programming” of CONSULT Operation Manual. Refer to CONSULT Operation Manual.
Ignition switch: ON
Electric load: OFF
Brake pedal: Not depressed
12V battery voltage: 12 – 13.5 V (Check the value displayed on the CONSULT screen.)
GO TO 8.
READ IN AV CONTROL UNIT PART NUMBER BY “FAST LINKED”
Obtain AV control unit part number by NISSAN PARTS CATALOGUE GLOBAL Web-FAST, according to the procedure of “FAST linked” in CONSULT Operation Manual. Refer to CONSULT Operation Manual.
>>GO TO 7.
PERFORM PROGRAMMING (FAST LINKED)
CONSULT
Perform AV control unit programming according to the procedure of FAST linked in CONSULT Operation Manual. Refer to CONSULT Operation Manual.
Ignition switch: ON
Electric load: OFF
Brake pedal: Not depressed
12V battery voltage: 12 – 13.5 V (Check the value displayed on the CONSULT screen.)
GO TO 8.
CONFIGURATION (AV CONTROL UNIT)
CONSULT Configuration
Perform configuration. Refer to Work Procedure.
>>GO TO 9.
WRITE VIN DATA (AV CONTROL UNIT)
CONSULT work support
Perform “WRITE VIN (SAVED DATA)” or “WRITE VIN (MANUAL INPUT)” to write VIN data.
>>Work End.