Driver Information & Multimedia

Diagnosis and Repair Workflow

2steps
~12min
1/5difficulty
Done 0 of 2
Work Flow

OVERALL SEQUENCE

DETAILED FLOW

GET INFORMATION FOR SYMPTOM

Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred).

>>

GO TO 2.

CONFIRM THE SYMPTOM

Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition when the symptom is detected.

>>

GO TO 3.

PERFORM SELF DIAGNOSTIC RESULT

CONSULT

  1. Ignition switch ON and wait for 2 seconds or more.

  2. Select “Self Diagnostic Result” mode of “MULTI AV”.

Are any DTCs displayed?

YES>>

Refer to DTC Index.

NO>>

GO TO 4.

PERFORM SYMPTOM DIAGNOSIS

Refer to Symptom Table.

>>

GO TO 5.

FINAL CHECK

Refer to symptom described by the customer in step 1.

Is the symptom still present?

YES>>

GO TO 2.

NO>>

Inspection End.