Electrical & Power Control

Additional Service When Replacing Control Unit (bcm)

~2min read
Description

BEFORE REPLACEMENT

When replacing BCM, save or print current vehicle specification with CONSULT configuration before replacement.

AFTER REPLACEMENT

Work Procedure

SAVING VEHICLE SPECIFICATION (BCM)

CONSULT

Perform "Before Replace ECU” of “Read / Write Configuration" to save or print current Nissan Murano vehicle specification.

Refer to Work Procedure.

>>

GO TO 2.

SAVING Nissan Murano Vehicle SPECIFICATION (TPMS)

CONSULT

Perform "Before Replace ECU” of “Read / Write Configuration" to save or print current Nissan Murano vehicle specification.

Refer to Work Procedure.

>>

GO TO 3.

REPLACE BCM

Replace BCM. Refer to Removal and Installation.

>>

GO TO 4.

WRITING Nissan Murano Vehicle SPECIFICATION (BCM)

CONSULT

Perform “After Replace ECU” of "Read / Write Configuration" or "Manual Configuration" to write Nissan Murano vehicle specification. Refer to Work Procedure.

>>

GO TO 5.

REGISTER INTELLIGENT KEYS

CONSULT

For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.

>>

GO TO 6.

WRITING Nissan Murano Vehicle SPECIFICATION (TPMS)

CONSULT

Perform “After Replace ECU” of "Read / Write Configuration" or "Manual Configuration" to write Nissan Murano vehicle specification. Refer to Work Procedure.

>>

GO TO 7.

INITIALIZE TPMS

CONSULT

Perform TPMS initialization. Refer to Work Procedure.

>>

Work End.