Electrical & Power Control
Battery Terminal with Fusible Link
In this manual: Electrical & Power Control
~1min read

| 1. | Cover | 2. | Positive terminal | 3. | Battery |
| 4. | Harness connectors | 5. | Fusible link box (battery) | 6. | Positive cable |
| Front |
REMOVAL
Disconnect negative battery terminal.
Remove the cover of the battery positive terminal and disconnect the positive battery terminal.
Disconnect the positive cable from the fusible link box (battery).
Disconnect harness connectors from the fusible link box (battery).
Separate positive terminal from fusible link box (battery) and remove.
INSTALLATION
Installation is in the reverse order of removal.
Reset electronic systems as necessary. Refer to Special Repair Requirement.
Was this page helpful?