Cruise Control & Driver Assistance

Component Parts. Intelligent Cruise Control System

~5min read
Component Parts Location
A. Center of instrument panel (view with center console assembly removed) B. Engine room right side C. Center area of front bumper
D. Engine room left side (view with fuse, fusible link and relay box cover removed) E. Brake pedal area (view with instrument lower panel LH removed) F. Instrument panel left side
No.ComponentFunction
1. Driver assistance buzzer Refer to Driver Assistance Buzzer.
2. TCM (Transmission Control Module)

TCM transmits the signal related to CVT control to ADAS control unit via CAN communication.

Refer to Component Parts Location for detailed component location.
3. ECM (Engine Control Module)
  • ECM transmits the accelerator pedal position signal, brake pedal position switch signal, stop lamp switch signal, ICC steering switch signal, etc., to ADAS control unit via CAN communication.

  • ECM controls the electric throttle control actuator based on the engine torque demand received from the ADAS control unit via CAN communication.

Refer to Component Parts Location for detailed component location.
4. ADAS (Advanced Driver Assistance System) control unit

Refer to ADAS Control Unit.

Refer to Component Parts Location for detailed component location.
5. ABS (Anti-lock Braking System) actuator and electric unit (control unit)
  • ABS actuator and electric unit (control unit) transmits the Nissan Murano vehicle speed signal (wheel speed), stop lamp signal and VDC/TCS/ABS system operation condition to ADAS control unit via CAN communication.

  • ABS actuator and electric unit (control unit) controls the brake based on a brake fluid pressure control signal received from the ADAS control unit via CAN communication.

Refer to Component Parts Location for detailed component location.
6. Distance sensor Refer to Distance Sensor.
7. ICC (Intelligent Cruise Control) brake hold relay Refer to ICC Brake Hold Relay.
8. Stop lamp switch Refer to Brake Pedal Position Switch/Stop Lamp Switch.
9. Brake pedal position switch
10.

Combination meter

(Information display, AEB indicator lamp, buzzer)
  • Description: Refer to Combination Meter.

  • System display and warning: Refer to Menu Displayed by Pressing Each Switch.

11. ICC steering switch Refer to ICC Steering Switch.
ICC Sensor
  • Distance sensor is installed behind the front lower grille and detects a vehicle ahead by using millimeter waves.

  • Distance sensor detects radar reflected from a Nissan Murano vehicle ahead by irradiating radar forward and calculates a distance from the vehicle ahead and relative speed, based on the detected signal.

  • Distance sensor transmits information for ICC from the Nissan Murano vehicle to ADAS control unit via ITS communication.

ADAS Control Unit
  • ADAS control unit is installed below the center console assembly.

  • ADAS control unit calculates and transmits an engine torque command value to ECM and a brake fluid pressure control signal to ABS actuator and electric unit (control unit) via CAN communication.

  • ADAS control unit transmits warning system buzzer output signal and meter display signal to combination meter via CAN communication.

Brake Pedal Position Switch/Stop Lamp Switch

BRAKE PEDAL POSITION SWITCH

  • Brake pedal position switch is installed at the upper part of the brake pedal and detects a brake operation performed by the driver.

  • Brake pedal position switch is normally closed, and is turned OFF when depressing the brake pedal.

  • Brake pedal position switch signal is input to ECM. Brake pedal position switch signal is transmitted from ECM to ADAS control unit via CAN communication.

STOP LAMP SWITCH

  • Stop lamp switch is installed at the lower part of the brake pedal and detects a brake operation performed by the driver.

  • Stop lamp switch is normally open, and is turned ON when depressing the brake pedal.

  • Stop lamp switch signal is input to ECM and ABS actuator and electric unit (control unit). Stop lamp switch signals are transmitted from ECM and ABS actuator and electric unit (control unit) to ADAS control unit via CAN communication.

ICC Steering Switch
  • ICC steering switch is installed to the steering wheel and allows the driver to operate the ICC system by using this switch.

  • ICC steering switch controls the ON/OFF of the Intelligent Cruise Control and the settings of a Nissan Murano vehicle speed and distance between vehicles.

  • ICC steering switch signal is transmitted to ECM. ECM transmits the signal to the ADAS control unit via CAN communication.

ICC Brake Hold Relay
  • ICC brake hold relay is installed in the engine room (LH).

  • When the brake is activated by the ICC system, the ICC brake hold relay turns ON the stop lamp by bypassing the circuit of the stop lamp according to a signal transmitted from the ADAS control unit.

Combination Meter
  • Performs the following operations using the signals received from the ADAS control unit via the CAN communication:

    • Displays the ICC system operation status using the meter display signal.

    • Illuminates the ICC system warning lamp using the ICC warning lamp signal.

    • Illuminates the AEB indicator lamp using the AEB indicator lamp signal.

  • Combination meter turns ON/OFF the AEB system and transmits a system selection signal to the ADAS control unit.

Warning Buzzer
  • Driver assistance buzzer is installed behind the instrument panel (RH).

  • Driver assistance buzzer operates when commanded by ADAS control unit.