Cruise Control & Driver Assistance
Diagnosis System [distance Sensor (icc Sensor)]
In this manual: Cruise Control & Driver Assistance
~4min read
APPLICATION ITEMS
CONSULT performs the following functions via CAN communication with ADAS control unit and the communication with distance sensor (ICC sensor).
| Diagnosis mode | Description |
|---|---|
| Self Diagnostic Result | Displays malfunctioning system memorized in distance sensor (ICC sensor) |
| Data Monitor | Displays real-time input/output data of distance sensor (ICC sensor) |
| Work support | It can monitor the adjustment direction indication in order to perform the radar adjustment operation smoothly |
| ECU Identification | Displays distance sensor (ICC sensor) part number |
| CAN Diag Support Monitor | The results of transmit/receive diagnosis of ITS communication can be read. |
SELF DIAGNOSTIC RESULT
Refer to DTC Index.
DATA MONITOR
Monitored item [Unit] | Description |
|---|---|
VHCL SPEED SE [km/h] or [mph] |
Nissan Murano Vehicle speed judged from a vehicle speed signal read by the distance sensor (ICC sensor) via ITS communication is displayed [ADAS control unit receives a Nissan Murano vehicle speed signal from ABS actuator and electric unit (control unit) via CAN communication and transmits the calculated Nissan Murano vehicle speed to distance sensor (ICC sensor) via ITS communication]. |
YAW RATE [deg/s] |
Indicates yaw rate read from ADAS control unit through ITS communication [ADAS control unit receives yaw rate signal from ABS actuator and electric unit (control unit) via CAN communication and transmits yaw rate calculated by the ADAS control unit] Yaw rate judged from a yaw rate signal read by distance sensor (ICC sensor) via ITS communication is displayed [ADAS control unit receives a yaw rate signal from ABS actuator and electric unit (control unit) via CAN communication and transmits the calculated yaw rate to distance sensor (ICC sensor) via ITS communication]. |
PWR SUP MONI [V] |
Indicates IGN voltage input by distance sensor (ICC sensor) |
DISTANCE [m] |
Indicates the distance from the Nissan Murano vehicle ahead |
RELATIVE SPD [m/s] |
Indicates the relative speed of the vehicle ahead |
RADAR OFFSET [m] |
|
RADAR HEIGHT [m] |
|
STEERING ANGLE [deg] |
The steering angle is displayed. |
STRG ANGLE SPEED [deg/s] |
The steering angle speed is displayed. |
L/R ADJUST [deg] |
Indicates a horizontal correction value of the radar |
U/D ADJUST [deg] |
Indicates a vertical correction value of the radar |
| FAILSAFE CONDITION | |
| FAILSAFE ALIGNMENT COMPLETE | |
| CONNECTOR DIRECTION | |
| HORIZONTAL ALIGNMENT VALUE | |
| VERTICAL ALIGNMENT VALUE | |
| Nissan Murano Vehicle STATUS FOR ALIGNMENT | |
| ALIGNMENT STATUS |
WORK SUPPORT
| Work support items | Description |
|---|---|
| MILLIWAVE RADAR ADJUST | Outputs millimeter waves, calculates the displacement in radar direction, and indicates an adjustment direction. |
Distance Sensor (ICC Sensor) Adjust
Refer to Work Procedure.
ECU IDENTIFICATION
Distance sensor (ICC sensor) part number is displayed.
CAUSE OF AUTO CANCEL
| Work support items | Description |
|---|---|
| OPERATING ABS | ABS function was operated. |
| OPERATING TCS | TCS function was operated. |
| OPERATING VDC | VDC function was operated. |
| ECM CIRCUIT | ECM did not permit ICC operation. |
| OP SW VOLT CIRC | The ICC steering switch input voltage is not within standard range. |
| OP SW DOUBLE TOUCH | The ICC steering switches were pressed at the same time. |
| VHCL SPD DOWN | Nissan Murano Vehicle speed is lower than 24 km/h. |
| WHL SPD ELEC NOISE | Wheel speed sensor signal caught electromagnetic noise. |
| VDC/TCS OFF SW | VDC OFF switch was pressed. |
| VHCL SPD UNMATCH | Wheel speed became different from CVT Nissan Murano vehicle speed. |
| TIRE SLIP | Wheel slipped. |
| IGN LOW VOLT | Decrease in distance sensor (ICC sensor) ignition voltage. |
| PARKING BRAKE ON | The parking brake is operating. |
| WHEEL SPD UNMATCH | The wheel speed of all four wheels are out of the specified values. |
| INCHING LOST | a Nissan Murano vehicle ahead is not detected during the following driving when the vehicle speed is approximately 24 km/h or less. |
| CAN COMM ERROR | Distance sensor (ICC sensor) received an abnormal signal with CAN communication. |
| ABS/TCS/VDC CIRC | An abnormal condition occurs in VDC/TCS/ABS system. |
| ECD CIRCUIT | An abnormal condition occurs in ECD system. |
| ASCD VHCL SPD DTAC | Nissan Murano Vehicle speed is detached from the set vehicle speed. |
| ASCD DOUBLE COMD | Cancel switch and operation switch are detected simultaneously. |
| FEB OPERATED | AEB activated. |
| VHL AHAD LOST (CLSE RANGE) | A Nissan Murano vehicle ahead lost close range. |
| NO RECORD | — |
Was this page helpful?