Driver Information & Multimedia

Component Parts. Telematics System

~3min read
Component Parts Location
No.ComponentFunction
1. Air bag diagnosis sensor unit

Provides TCU with air bag crash order signal via CAN communication.

Refer to Component Parts Location for detailed component location.
2. Telematics switch Refer to Telematics Switch.
3. ABS actuator and electric unit (Control unit)

Provides TCU with ABS malfunction signal via CAN communication.

Refer to Component Parts Location for detailed component location.
4. TCM (Transmission Control Module)

Provides TCU with transmission range indication signal via CAN communication.

Refer to Component Parts Location for detailed component location.
5. ECM (Engine Control Module)

Provides TCU with the following signals via CAN communication

  • engine RPM signal.

  • MIL lamp signal.

Refer to Component Parts Location for detailed component location.
6. IPDM E/R (Intelligent Power Distribution Module Engine Room)

Provides TCU with anti-theft horn status signal via CAN communication.

Refer to Component Parts Location for detailed component location.
7. Microphone Refer to Microphone.
8. AV control unit Refer to AV Control Unit.
9. Telematics antenna Refer to Telematics Antenna.
10. Combination meter

Provides TCU with the following signals via CAN communication

  • Nissan Murano vehicle speed signal.

  • hand brake switch signal.

Refer to Component Parts Location for detailed component location.
11. TCU Refer to TCU.
AV Control Unit
  • A 8-inch color display with multi-touch control, an AM/FM HD electronic tuner radio with RDS, CD drive, audio amplifier and camera controller are integrated into the AV control unit.

  • The 8-inch color display is a high resolution monitor that includes touch panel functions.

TCU
  • Telematics Communication Unit (TCU) is installed behind the instrument panel, below the A/C switch assembly.

  • A radio communication terminal and SIM card are built into the unit and data is sent and received in SMS*, DTMF tone signal with the NissanConnect® center through the TEL antenna.

  • It is connected to the AV control unit with the USB harness for sound signal input/output and USB communication.

  • It is connected to the airbag diagnosis sensor unit via CAN communication. TCU performs an emergency report when the air bag is inflated.

  • VIN information necessary for the Telematics service is memorized.

  • Audio signals received during SOS/Operator call are transmitted from TCU to each speaker via the AV control unit and Bose speaker amp.

  • During the communication with NissanConnect center, TCU transmits a TEL ON signal to the AV control unit to prohibit the use of Bluetooth® hands-free phone.

Telematics Antenna
  • The telematics antenna consists of TEL antenna and GPS antenna.

  • It is installed in the instrument panel.

Telematics Switch
  • The Telematics switch is located on the map lamp assembly.

  • The Telematics switch is connected to TCU and transmits an operation signal.

  • The state of LED (ON/Blink/OFF) shows the status of SOS call.

    LED ON :SOS Call available
    LED Blink :SOS Call in communication
    LED OFF :Out of service area or system error
Microphone
  • Microphone is installed on the map lamp assembly.

  • The microphone is used for the operation of the NissanConnect, hands-free phone system, voice recognition function.

  • The power is supplied from the TCU to the microphone, transmitting sound signals to the TCU at the during operation of the NissanConnect system, hands-free phone communication, and voice recognition.