Driver Information & Multimedia
Diagnosis System (tcu)
In this manual: Driver Information & Multimedia
~2min read
APPLICABLE ITEMS
CONSULT performs the following functions via communication with the TCU.
| Direct Diagnostic Mode | Description |
|---|---|
| ECU Identification | The TCU part number and various ID numbers are displayed. |
| Self Diagnostic Result | The TCU self diagnostic results are displayed. |
| Data Monitor | The TCU input/output data is displayed in real time. |
| Work support | The settings for TCU functions can be changed. |
| Configuration |
|
| CAN Diag Support Mntr |
|
ECU IDENTIFICATION
| Display items | Description |
|---|---|
| ECU PART NUMBER | Displays TCU part number. |
| UNIT ID | Displays AV control unit ID number. |
| TCU ID | Displays TCU ID number. |
| SIM ID | Displays ICC ID of SIM card. |
| V.I.N | Displays the Nissan Murano vehicle identification number stored in TCU. |
SELF-DIAGNOSIS RESULT
Refer to DTC Index.
DATA MONITOR
| Monitor Item [Unit] | Description |
|---|---|
| HF TYPE [BT/NO BT] | HF type is displayed. |
| AUDIO UNIT TYPE [AUDIO/NAVI] | AV control unit type is displayed. |
| CALL SWITCH TYPE [SOS/OP] | Call switch type is displayed. |
| SPEAKER TYPE [INDRCT] | Speaker type is displayed. |
| ZONE [USA] | Zone is displayed. |
| CHANNEL [NISSAN] | Channel is displayed. |
| CAN COMM [GEN.3] | CAN comm is displayed. |
| AV COMM [ENABLE/DISABLE] | AV comm is displayed. |
| K-LINE [ENABLE/DISABLE] | K-Line is displayed. |
| Nissan Murano Vehicle TYPE [ENG] | Vehicle type is displayed. |
| ECHO CANCEL [TYPE 1/TYPE 2/TYPE 3/TYPE 4] | Echo cancel type is displayed. |
| NOISE CANCEL [TYPE 1/TYPE 2/TYPE 3/TYPE 4] | Noise cancel type is displayed. |
| TCU STANDBY TIME [2DAYS/14DAYS/30DAYS] | TCU standby time is displayed. |
| SENSOR ANGLE X | — |
| SENSOR ANGLE Y | — |
| SENSOR ANGLE Z | — |
| SVTB | — |
| REMOTE DOOR LOCK [ENABLE/DISABLE] | Remote door lock is displayed. |
| REMOTE HORN & LAMP [ENABLE/DISABLE] | Remote horn and lamp is displayed. |
| REMOTE START [ENABLE/DISABLE] | Remote start is displayed. |
| NAD OUTPUT STATUS [On/Off] | TCU activation is displayed. |
| ACN COMM SEQUENCE LOG [1–255] | ACN communication sequence log is displayed. |
| SOS COMM SEQUENCE LOG [1–10] | SOS communication sequence log is displayed. |
| SOS SW [ON/OFF] | SOS switch is displayed. |
WORK SUPPORT
| Conditions | Description |
|---|---|
| SAVE VIN DATA | VIN data saved in TCU is stored in CONSULT. |
| TCU ACTIVATE SETTING | Off: TCU activation Off. |
| On: TCU activation On. | |
| WRITE VIN (SAVED DATA) | VIN data from SAVE VIN DATA can be written to new TCU. |
| WRITE VIN (MANUAL INPUT) | VIN data can be manually written to new TCU. |
CONFIGURATION
Refer to Description.
CAN DIAG SUPPORT MNTR
Refer to CAN Diagnostic Support Monitor.
Was this page helpful?