Ventilation, Heater & Air Conditioner

Condenser

~1min read
Exploded View
1. Condenser upper bracket (RH) 2. Condenser pipe assembly 3. Refrigerant pressure sensor
4. Condenser lower bracket (RH) 5. Condenser (includes liquid tank) 6. Condenser lower bracket (LH)
7. Condenser upper bracket (LH)
Removal and Installation

REMOVAL

Discharge the refrigerant. Refer to Recycle Refrigerant.

Remove the front air duct. Refer to Exploded View.

Remove the hood lock assembly. Refer to Removal and Installation.

Disconnect the harness connector from the refrigerant pressure sensor.

Remove the radiator core support center brace bolts (A) then remove the radiator core support center brace.

Remove the bolt that retains the condenser pipe assembly to the condenser then separate the condenser pipe assembly from the condenser.

Remove the condenser bracket bolts.

Remove the condenser.

Remove the refrigerant pressure sensor (if necessary). Refer to Removal and Installation.

INSTALLATION

Installation is in the reverse order of removal.