Ventilation, Heater & Air Conditioner
Evaporator
In this manual: Ventilation, Heater & Air Conditioner
~1min read
Heating and Cooling Unit Components
| 1. | Heating and cooling unit assembly | 2. | Evaporator | 3. | Heater case side cover |
| 4. | Air mix door motor (RH) | 5. | Blower unit case | 6. | Intake door motor |
| 7. | Blower motor | 8. | Upper floor connecting duct (RH) | 9. | In-cabin microfilter cover |
| 10. | In-cabin microfilter | 11. | Drain hose | 12. | Expansion valve grommet |
| 13. | Expansion valve | 14. | Heater core | 15. | Air mix door motor (LH) |
| 16. | Aspirator hose | 17. | Upper floor connecting duct (LH) | 18. | Heater core pipe cover |
| 19. | Mode door motor (front) |
REMOVAL
Discharge the refrigerant. Refer to Recycle Refrigerant.
Remove the heating and cooling unit assembly. Refer to Exploded View.
Remove the blower unit case from the heating and cooling unit assembly.
Remove the heater case side cover.
Remove the evaporator.
Remove the expansion valve from the evaporator (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?