Ventilation, Heater & Air Conditioner

Expansion Valve

~1min read
Removal and Installation

Heating and Cooling Unit Assembly Components

1. Heating and cooling unit assembly 2. Evaporator 3. Heater case side cover
4. Air mix door motor (RH) 5. Blower unit case 6. Intake door motor
7. Blower motor 8. Upper floor connecting duct (RH) 9. In-cabin microfilter cover
10. In-cabin microfilter 11. Drain hose 12. Expansion valve grommet
13. Expansion valve 14. Heater core 15. Air mix door motor (LH)
16. Aspirator hose 17. Upper floor connecting duct (LH) 18. Heater core pipe cover
19. Mode door motor (front)

REMOVAL

Discharge the refrigerant. Refer to Recycle Refrigerant.

Remove the cowl top extension. Refer to Removal and Installation - Cowl Top Cover.

Disconnect the high-pressure pipe and internal heat exchanger from the expansion valve.

Remove the expansion valve bolts then remove the expansion valve.

INSTALLATION

Installation is in the reverse order of removal.