Starting and driving

Cruise control operations

9steps
~54min
2/5difficulty
Done 0 of 9

The cruise control allows driving at a speed between 25 - 144 km/h without keeping your foot on the accelerator pedal.

To turn on the cruise control, push the ON/OFF switch on. The Nissan Murano. Cruise control operations indicator in the vehicle information display will illuminate. If the Cruise Control Alerts are enabled in the Driver Assistance menu, then the “Cruise ON: Press SET to engage speed control” message will appear in the vehicle information display.

This message will disappear after about 6 seconds, or can be dismissed by pushing the OK button. Cruise control status will continue to display in the upper right corner of the vehicle information display while the system is on.

To set cruising speed, accelerate the vehicle to the desired speed, push the SET/– switch and release it. Take your foot off the accelerator pedal. Your vehicle maintains the set speed.

If the Cruise Control Alerts are enabled in the Driver Assistance menu, then the “Target Speed SET. Press + or – to adjust” message will appear in the vehicle information display when the SET/– switch is pushed.

This message will disappear after about 6 seconds, or can be dismissed by pushing the OK button. Cruise control status will continue to display in the upper right corner of the vehicle information display while the system is on.

  • To pass another vehicle, depress the accelerator pedal.When you release the pedal, the vehicle returns to the previously set speed.
  • The vehicle may not maintain the set speed when going up or down steep hills. If this happens, drive without the cruise control.

To cancel the preset speed, use one of the following three methods:

  1. Push the CANCEL switch.
  2. Tap the brake pedal.
  3. Push the ON/OFF switch off. The Nissan Murano. Cruise control operations indicator in the vehicle information display goes out.

The cruise control is automatically canceled if:

  • You depress the brake pedal while pushing the RES/+ or SET/– switch. The preset speed is deleted from memory.
  • The vehicle slows down more than 13 km/h below the set speed.
  • You move the shift lever to N (Neutral).

If the Cruise Control Alerts are enabled in the Driver Assistance menu, the “Cruise ON: Press SET to engage speed control” message will reappear in the vehicle information display to let you know the cruise control system is still on if you set the target speed again.

To reset at a faster cruising speed, use one of the following three methods:

  1. Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the SET/– switch.
  2. Push and hold the RES/+ switch. When the vehicle attains the speed you desire, release the switch.
  3. Push and release the RES/+ switch. Each time you do this, the set speed increases by about 1,6 km/h.

To reset at a slower cruising speed, use one of the following three methods:

  1. Lightly tap the brake pedal. When the vehicle attains the desired speed, push the SET/– switch and release it.
  2. Push and hold the SET/– switch.Release the switch when the vehicle slows to the desired speed.
  3. Push and release the SET/– switch.Each time you do this, the set speed decreases by about 1,6 km/h.

To resume the preset speed, push and release the RES/+ switch. The vehicle returns to the last set cruising speed when the vehicle speed is over 40 km/h.

To turn off the cruise control, use one of the following three methods:

  • Push the CANCEL switch.
  • Tap the brake pedal.
  • Push the ON/OFF switch off. The Nissan Murano. Cruise control operations indicator in the vehicle information display goes out.