Electrical & Power Control
Diag on Can
In this manual: Electrical & Power Control
~1min read
SYSTEM DIAGRAM

| Name | Harness | Description |
|---|---|---|
| DDL1 | Tx Rx |
For communications with the diagnostic tool. (CAN-H and CAN-L are used for controlling) |
| DDL2 | K-LINE | For communications with the diagnostic tool. (CAN-H and CAN-L are used for controlling) |
| Diag on CAN | CAN-H CAN-L |
For communications with the diagnostic tool. (CAN-H and CAN-L are also used for control and diagnoses.) |
DESCRIPTION
“Diag on CAN” is a diagnosis method which uses the CAN communication line for the communication between the control unit and the diagnostic tool.
Was this page helpful?