Pre-driving checks and adjustments
Entry/exit function
In this manual: Pre-driving checks and adjustments
2steps
~12min
1/5difficulty
Done 0 of 2
This system is designed so that the driver’s seat and steering column will automatically move when the shift lever is in the P (Park) position. This allows the driver to easily get in and out of the driver’s seat.
The driver’s seat will slide backward and the steering wheel will move up:
- When the driver’s door is opened and the ignition switch is in the OFF position.
- When the ignition switch is turned from ACC to OFF with the driver’s door open.
The driver’s seat and steering wheel will return to the previous position:
- When the ignition switch is turned to ACC or ON while the shift lever is in the P (Park) position.
The entry/exit function can be adjusted or canceled through the “Vehicle Settings” in the vehicle information display by performing the following:
- Switch the Exit Seat Slide from ON to OFF.
- Switch the Exit Steering Up from ON to OFF.
Restarting the entry/exit function
If the battery cable is disconnected or if the fuse opens, the stored memory positions may be lost and some of the functions will be restricted.
- Drive the vehicle over 40 km/h. OR
- Open and close the driver’s door more than two times with the ignition switch in the OFF position.
The entry/exit function should now work properly.
Was this page helpful?