Transmission & Driveline
Front Axle :: Preparation. Preparation
In this manual: Transmission & Driveline
~1min read
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
KV40107300 (J-51751) Boot band crimping tool |
![]() |
Installing boot band |
KV38107900 (J–52469–1) Differential side oil seal protector |
![]() |
Installing drive shaft A: 32 mm (1.26 in) diaB: Minimum 23 mm (0.91 in) |
— (J-52390) Transfer case seal installer (1) |
![]() |
Installing drive shaft oil seal |
— (J-8092) Driver handle |
![]() |
Installing drive shaft oil seal (Use with J-52390) |
| Tool name | Description | |
| Ball joint remover | ![]() |
Removing wheel stud |
| Sliding hammer | ![]() |
Removing drive shaft |
| Power tool | ![]() |
Loosening nuts, screws and bolts |
| Slide hammer | ![]() |
Removing drive shaft oil seal |
| Oil seal remover | ![]() |
Removing oil seal |
Was this page helpful?








