Front Door Finisher

| 1. | Front door | 2. | Front door finisher screw grommet | 3. | Front door finisher |
| 4. | Inside door handle | 5. | Inside door handle escutcheon | 6. | Door pull handle escutcheon |
| 7. | Main power window and door lock/unlock switch LH | 8. | Seat memory switch (if equipped) | Clip | |
| Pawl | Front |
REMOVAL
Using a suitable tool release pawls and remove pull handle cap then remove front door finisher bolts. Refer to Exploded View.
Using a suitable tool release pawls and remove inside door handle escutcheon then remove front door finisher bolt. Refer to Exploded View.
Pull armrest in direction shown (
) then starting at rear release power window and door lock/unlock switch finisher (1) pawls using a suitable tool (A).

: Front
: Pawl
Disconnect the harness connectors (A) from the power window and door lock/unlock switch (1) and harness connector (B) from the door mirror remote control switch (2) and remove.

Using a suitable tool release front door finisher clips. Exploded View.
Disconnect the harness connector from the front door finisher.
Disconnect the door lock cable and inside door handle cable from the front door finisher.
Remove front door finisher.
Remove seat memory switch (if necessary). Refer to Removal and Installation.
INSTALLATION
Installation is in the reverse order of removal.