Body Interior
Rear Door Finisher
In this manual: Body Interior
~1min read

| 1. | Rear door | 2. | Rear door finisher | 3. | Inside door handle escutcheon |
| 4. | Rear power window switch | 5. | Pull handle cap | Clip | |
| Pawl | Front |
REMOVAL
Using a suitable tool release pawls and remove pull handle cap then remove rear door finisher bolt. Refer to Exploded View.
Using a suitable tool release pawls and remove inside door handle escutcheon then remove rear door finisher bolt. Refer to Exploded View.
Pull armrest in direction shown (
) then starting at rear release rear power window switch finisher (1) pawls using a suitable tool (A).

: Front
: Pawl
Disconnect the harness connector from the rear power window switch and remove.
Using a suitable tool release rear door finisher clips and pawl. Refer to Exploded View.
Disconnect the door lock cable and inside door handle cable from the rear door finisher.
Remove rear door finisher.
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?