Front Wiper Motor Lo Circuit
CHECK FRONT WIPER LO OPERATION
CONSULT
Select “FRONT WIPER” in “Active Test” mode of “IPDM E/R”.
While operating the test item, check front wiper operation.
Lo : Front wiper (LO) operation Off : Stop the front wiper.
Is front wiper (LO) operation normal?
YES>>Front wiper motor LO circuit is normal.
NO>>Refer to Diagnosis Procedure.
CHECK FRONT WIPER MOTOR (LO) OUTPUT VOLTAGE
CONSULT
Ignition switch OFF.
Disconnect front wiper motor connector.
Ignition switch ON.
Select ”FRONT WIPER” in “Active Test” mode of “IPDM E/R”.
While operating the test item, check voltage between front wiper motor harness connector and ground.
| (+) | (−) | Condition | Voltage (Approx.) | ||
|---|---|---|---|---|---|
| Front wiper motor | |||||
| Connector | Terminal | ||||
| E23 | 1 | Ground | FRONT WIPER | Lo | Battery voltage |
| Off | 0 V | ||||
Is the inspection result normal?
YES>>Replace front wiper motor. Refer to Removal and Installation.
NO>>GO TO 2.
CHECK FRONT WIPER MOTOR (LO) CIRCUIT
Ignition switch OFF.
Disconnect IPDM E/R connector.
Check continuity between IPDM E/R harness connector and front wiper motor harness connector.
IPDM E/R Front wiper motor Continuity Connector Terminal Connector Terminal E121 11 E23 1 Yes Check continuity between IPDM E/R harness connector and ground.
IPDM E/R — Continuity Connector Terminal E121 11 Ground No
Is the inspection result normal?
YES>>Replace IPDM E/R. Refer to Removal and Installation.
NO>>Repair or replace harness.