Body Exterior, Doors, Roof & Vehicle Security
Hood Stay
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~1min read
REMOVAL
Support hood assembly using a suitable tool.
Remove metal clip (3) located on connection between hood stay (1) and stud ball (2) (hood side) by using a suitable tool (A) to release clip to side and then toward front.

Release stud ball from hood stay (hood side).
Release stud ball from hood stay (body side) then remove hood stay.
INSTALLATION
Installation is in the reverse order of removal.
Fix hood stay (1) using a vise (C).

Using a hacksaw (A), slowly make two holes in hood stay (1) in numerical order as shown in figure.
Was this page helpful?