Starting and driving

How to change the set vehicle speed

~2min read

To cancel the preset speed, use one of the following methods:

  • Push the CANCEL switch. The set vehicle speed indicator will go out.
  • Tap the brake pedal. The set vehicle speed indicator will go out.
  • If the Cruise Control Alerts are enabled in the Driver Assistance menu, the “Cruise ON: Press SET to engage speed control” message will reappear in the vehicle information display to let you know the cruise control system is still on if you set the target speed again.
  • Turn the CRUISE ON/OFF switch off. The ICC indicators will go out, and the Cruise Control Alert messages will not appear.

To reset at a faster cruising speed, use one of the following methods:

  • Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the SET/– switch.
  • Push and hold the RES/+ switch. The set vehicle speed will increase by approximately 5 km/h.
  • Push, then quickly release the RES/+ switch. Each time you do this, the set speed will increase by approximately 1 km/h.

To reset at a slower cruising speed, use one of the following methods:

  • Lightly tap the brake pedal. When the vehicle attains the desired speed, push the SET/– switch and release it.
  • Push and hold the SET/– switch. The set vehicle speed will decrease by approximately 5 km/h.
  • Push, then quickly release the SET/– switch. Each time you do this, the set speed will decrease by approximately 1 km/h.

To resume the preset speed, push and release the RES/+ switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 32 km/h.