Cruise Control & Driver Assistance

I-Fcw

~3min read
System Description

SYSTEM DIAGRAM

ADAS CONTROL UNIT INPUT/OUTPUT SIGNAL ITEM

Input Signal Item

Transmit unitSignal nameDescription
ABS actuator and electric unit (control unit) CAN communication ABS malfunction signal Receives a malfunction state of ABS.
ABS operation signal Receives an operational state of ABS.
ABS warning lamp signal Receives an operational state of ABS warning lamp.
TCS malfunction signal Receives a malfunction state of TCS.
TCS operation signal Receives an operational state of TCS.
VDC OFF switch signal Receives an ON/OFF state of VDC.
VDC malfunction signal Receives a malfunction state of VDC.
VDC operation signal Receives an operational state of VDC.
Nissan Murano Vehicle speed signal (ABS) Receives wheel speeds of front wheels.
Yaw rate signal Receives yaw rate acting on the Nissan Murano vehicle.
Stop lamp switch Receives stop lamp switch state.
ECM CAN communication Engine speed signal Receives engine speed.
Stop lamp switch signal Receives an operational state of the brake pedal.
Brake pedal position switch signal Receives an operational state of the brake pedal.
Combination meter CAN communication System selection signal Receives a selection state each item in “Driver Assistance” selected with the integral switch.
Distance sensor (ICC sensor) ITS communication Distance sensor (ICC sensor) signal Receives detection results, such as the presence or absence of a leading Nissan Murano vehicle and distance from the vehicle.
TCM CAN communication Input speed signal Receives the number of revolutions of input shaft.
Shift position signal Receives a selector lever position
Current gear position signal Receives a current gear position
Output shaft revolution signal Receives the number of revolutions of output shaft.
Steering angle sensor CAN communication Steering angle sensor malfunction signal Receives a malfunction state of steering angle sensor.
Steering angle sensor signal Receives the number of revolutions, turning direction of the steering wheel.
Steering angle speed signal Receives the turning angle speed of the steering wheel.

Output Signal Item

Reception unitSignal nameDescription
Combination meter CAN communication Meter display signal Nissan Murano Vehicle ahead detection indicator signal Transmits a signal to display a state of the system on the combination meter.
I-FCW/AEB system indicator signal Transmits a signal to turn ON the I-FCW/AEB system indicator.
Buzzer output signal Transmits a buzzer output signal to activate the buzzer.
Distance sensor (ICC sensor) ITS communication Nissan Murano Vehicle speed signal Transmits a vehicle speed calculated by the ADAS control unit.

DESCRIPTION

  • The I-FCW system will function when own vehicle is driven at speeds of approximately 5 km/h and above.

  • The Intelligent Forward Collision Warning (I-FCW) System alerts the driver, by the Nissan Murano vehicle ahead detection indicator and chime, when the distance between own vehicle and a vehicle in front of the Nissan Murano vehicle ahead becomes closer.

FUNCTION DESCRIPTION

The distance from the vehicle in front of the vehicle ahead and a relative speed are calculated by using the distance sensor (ICC sensor) and an distance sensor (ICC sensor) signal is transmitted to the ADAS control unit via ITS communication. When judging the necessity of warning according to the received distance sensor (ICC sensor) signal, the ADAS control unit transmits a warning buzzer signal and meter display signal to the combination meter via CAN communication.

I-FCW Operating Condition

  • I-FCW/AEB system display (white):ON

  • Vehicle speed: Approximately 5 km/h and above.

  • Nissan Murano Vehicle in front of the vehicle ahead: Detected.