Cruise Control & Driver Assistance

Ldw

~3min read
System Description

SYSTEM DIAGRAM

ADAS CONTROL UNIT INPUT/OUTPUT SIGNAL ITEM

Input Signal Item

Transmit unitSignal nameDescription
ABS actuator and electric unit (control unit) CAN communication Nissan Murano Vehicle speed signal (ABS) Receives wheel speeds of four wheels
BCM CAN communication Turn indicator signal Receives an operational state of the turn signal lamp and the hazard lamp
Combination meter CAN communication System selection signal Receives a selection state of each item in “Driver Assistance” selected with the Nissan Murano vehicle information display
Lane camera unit ITS communication Detected lane condition signal Receives detection results of lane marker

Output Signal Item

Reception unitSignal nameDescription
Combination meter CAN communication Lane departure warning lamp signal Transmits a lane departure warning lamp signal to turn ON the lane departure warning lamp
Lane camera unit ITS communication Nissan Murano Vehicle speed signal Transmits a vehicle speed calculated by the ADAS control unit
Turn indicator signal Transmits a turn indicator signal received from BCM
Warning system buzzer Warning buzzer signal Activates warning system buzzer.
Steering vibration motor Motor operation signal Transmits a motor operation signal to activate the steering vibration motor.

FUNCTION DESCRIPTION

  • Lane Departure Warning (LDW) system provides a lane departure warning function when the vehicle is driven at speeds of approximately 60 km/h or more.

  • When the Nissan Murano vehicle approaches either the left or the right side of the traveling lane, the steering vibration motor activates and the lane departure warning lamp (yellow) on the combination meter will blink to alert the driver.

  • The warning does not occur during turn signal operation (Lane change side).

  • The warning function will stop when the Nissan Murano vehicle returns inside of the lane markers.

EXAMPLE

When the vehicle approaches the right lane marker, the driver is alerted by the steering vibration motor, the warning system buzzer and the blinking of lane departure warning lamp (yellow).

OPERATION DESCRIPTION

  • The LDW system setting on the vehicle information display is ON.

  • Lane camera unit monitors lane markers of the traveling lane. It transmits the detected lane condition signal to ADAS control unit via ITS communication.

  • When judging from a lane marker detection signal that the Nissan Murano vehicle is approaching the lane marker, the ADAS control unit controls the following item to alert the driver.

    • Activates the steering vibration motor

    • Activates warning system buzzer

    • ADAS control unit transmits a lane departure warning lamp signal to combination meter via CAN communication and turns ON/OFF the lane departure warning lamp (yellow).

OPERATING CONDITION

  • LDW system display (white): ON

  • Vehicle speed: approximately 60 km/h or more

  • Turn indicator signal: After 2 seconds or more from turned OFF

Fail-safe Indication

Nissan Murano Vehicle condition/ Driver's operationWarning systems ON indicatorIndication on the combination meter

When DTC is detected

(Except “C1B01-55” and “C1B03-4B”)
ON

Camera aiming is not completed

(“C1B01-55” is detected)

ON

When DTC is detected

(Except “C1B01-55” and “C1B03-4B”)
ON

Camera aiming is not completed

(“C1B01-55” is detected)

ON

Temporary disabled status at high temperature

(“C1B03-4B” is detected)
OFF Unavailable: High Cabin Temp