Pre-driving checks and adjustments

Liftgate release

3steps
~18min
2/5difficulty
Done 0 of 3
  • Always be sure the liftgate has been closed securely to prevent it from opening while driving.
  • Do not drive with the liftgate open. This could allow dangerous exhaust gases to be drawninto the vehicle. For additional information, refer to “Exhaust gas (carbon monoxide)” in the “Starting and driving” section of this manual.
  • To avoid personal injury, do not attempt to activate the power liftgate if one or both of the liftgate struts are removed.
  • If the power liftgate does not stay open or if the liftgate unexpectedly closes at any time while a continuous warning chime sounds, do not operate the liftgate. There may be a pressure loss in one or both of the liftgate struts. It is recommended that you have the liftgate inspected. It is recommended that you visit a NISSAN dealer for this service.
  • Do not activate the power liftgate if one or both of the liftgate struts are removed. Damage to the liftgate or power liftgate mechanisms may occur.

Liftgate release (manual and power)

Nissan Murano. Liftgate release

The liftgate release mechanism allows the liftgate to be opened in the event of a discharged battery.

To release the liftgate fromthe inside of the vehicle, perform the following operations:

  1. Position the rear bench seat forward. For additional information, refer to “Rear bench seat adjustment” in the “Safety—Seats, seat belts and supplemental restraint system” section of this manual.
  2. Insert a suitable tool into the top access opening at about a 45 degree angle and rotate to the left until the lock releases.
  3. Push the liftgate up to open.