Pre-driving checks and adjustments
Motion-Activated Liftgate (if so equipped)
In this manual: Pre-driving checks and adjustments
~2min read
The liftgate can be operated using a quick kicking motion under the center of the rear bumper.
To operate, the Intelligent Key must be within 31.5 in (80 cm) of the liftgate.
Proper operation technique

Activation zone
- While at the rear of the vehicle, begin making a quick forward kicking motion.
- Raise your foot straight under the center of the rear bumper then immediately return your foot to the ground in a continuous motion.
- The kicking motion should be straight, smooth and consistent.
- After your kick motion is complete, step back and allow the liftgate to open/close.

DO: Quick forward kick and return while the key fob is within range
- Three beeps will sound and the liftgate will begin moving within two seconds after the kick.

DO NOT: Swing foot side to side or pause during kick
Was this page helpful?