Driver Information & Multimedia
Light Reminder Warning
In this manual: Driver Information & Multimedia
2steps
~12min
3/5difficulty
Done 0 of 2
SYSTEM DIAGRAM

If all of the following conditions are fulfilled:
| Operation conditions | |
|---|---|
| Ignition switch | OFF |
| Combination switch (Lighting switch) | 1st or 2nd position |
| Driver side door | Open [front door switch LH ON] |
Warning is canceled if any of the following conditions are fulfilled:
| Operation conditions | |
|---|---|
| Ignition switch | ON |
| Combination switch (Lighting switch) | OFF or AUTO position |
| Driver side door | Close [front door switch LH OFF] |
SIGNAL PATH
BCM requires warning chime output to combination meter when it judges light reminder warning chime is necessary from signals below.
Signal name Signal source Ignition switch signal — Combination switch signal Combination switch (Lighting switch)
BCMFront door switch LH signall Front door switch LH
BCMCombination meter sounds integrated buzzer, following the warning chime output requirement (below signal) from BCM.
Signal name Signal source Buzzer output signal BCM
Combination meter
Was this page helpful?