Body Exterior, Doors, Roof & Vehicle Security
Main Power Window and Door Lock/unlock Switch
In this manual: Body Exterior, Doors, Roof & Vehicle Security
3steps
~18min
2/5difficulty
Done 0 of 3
REMOVAL
Pull armrest in direction shown (
) then starting at rear release main power window and door lock/unlock switch finisher (1) pawls using a suitable tool (A).
: Front
: PawlDisconnect the harness connectors (A) from the main power window and door lock/unlock switch (1) and harness connector (B) from the door mirror remote control switch (2) and remove.

Release pawls then separate main power window and door lock/unlock switch (1) from switch finisher (2).

: Pawl
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?