Body Exterior, Doors, Roof & Vehicle Security

Rear Power Window Switch

3steps
~18min
2/5difficulty
Done 0 of 3
Removal and Installation

REMOVAL

  1. Pull armrest in direction shown () then starting at rear release rear power window switch finisher (1) pawls using a suitable tool (A).

    : Front

    : Pawl

  2. Disconnect the harness connector from the rear power window switch and remove.

  3. Release the pawls then separate the rear power window switch (1) from the switch finisher (2).

    : Pawl

INSTALLATION

Installation is in the reverse order of removal.