Body Interior

Manual Function

2steps
~12min
1/5difficulty
Done 0 of 2
System Description

SYSTEM DIAGRAM

DESCRIPTION

The driving position (seat, steering column and door mirror position) can be adjusted manually with power seat switch LH, ADP steering switch and door mirror remote control switch.

Operation procedure

  1. Operate power seat switch LH, ADP steering switch or door mirror remote control switch.

  2. The driver seat, steering column or door mirror operates according to the operation of each switch.

DETAIL FLOW

Seat

OrderInputOutputControl unit condition
1

Power seat switch LH

(sliding, lifting, reclining)
— The power seat switch LH signal is inputted to the driver seat control unit when the power seat switch LH is operated.
2 —

Motors

(sliding LH, lifting LH, reclining LH)
The driver seat control unit outputs signals to each motor according to the power seat switch LH input signal.

Tilt and Telescopic

OrderInputOutputControl unit condition
1 ADP steering switch — The ADP steering switch signal is input to the automatic drive positioner control unit when the ADP steering switch is operated.
2 —

Motors

(tilt, telescopic)
The automatic drive positioner control unit actuates the motors according to the operation of the ADP steering switch signal.
3

Sensors

(tilt, telescopic)
— The automatic drive positioner control unit recognizes any operation limit of each actuator via each sensor and will not operate the motors anymore at that time.

Door Mirror

OrderInputOutputControl unit condition
1

Door mirror remote

control switch
— The door mirror remote control switch signal is inputted to the automatic drive positioner control unit when the door mirror remote control switch is operated.
2 —

Motors

(Door mirror motor)
The automatic drive positioner control unit actuates each motor according to the operation of the door mirror remote control switch.