Driver Information & Multimedia
Meter Buzzer Circuit
In this manual: Driver Information & Multimedia
2steps
~12min
1/5difficulty
Done 0 of 2
CHECK OPERATION OF METER BUZZER
CONSULT
Select “LIGHT WARN ALM” in “Active Test” mode of “BCM(BUZZER)”.
Select “ON/OFF” to check that the function operates normally.
Is the inspection result normal?
YES>>Inspection End.
NO>>Refer to Diagnosis Procedure.
CHECK POWER SUPPLY OF COMBINATION METER
Check power supply of combination meter. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Repair power supply circuit of combination meter.
Was this page helpful?