Driver Information & Multimedia
Meter Effect Function
In this manual: Driver Information & Multimedia
~1min read
SYSTEM DIAGRAM

ENGINE-START EFFECT FUNCTION
When recognizing an engine start, the combination meter controls the following items for producing the effect:
Speedometer
Tachometer
Engine coolant temperature gauge
Fuel gauge
Meter illumination
Meter and Illumination Operations During Engine-start Effect
The combination meter controls the following items during the engine-start effect:
| Control item | Operation | |
|---|---|---|
| Speedometer | Sweeps the pointer. | |
| Tachometer | Sweeps the pointer. | |
| Engine coolant temperature gauge | Stops the pointer. | |
| Fuel gauge | Stops the pointer. | |
| Meter illumination | Pointers | Turns on the illumination at the effect level. |
| Information display | Turns on the illumination at the normal brightness level. | |
| Other than those above | Increases the brightness to the effect level in stages. | |
Engine Start Judgment
The combination meter judges engine-start and activates the engine-start effect only once when the following operational conditions are all satisfied:
| Condition | |
|---|---|
| Ignition switch | ON position |
| Nissan Murano Vehicle speed | Less than 1 km/h |
| Engine state | Other than the time of cranking the engine |
| 500 rpm or more | |
Information display (SETTING) |
The setting of “EFFECT” is ON |
Was this page helpful?