Oil Pump
REMOVAL
Remove the engine from the vehicle. Refer to Removal and Installation (FWD) or Removal and Installation (AWD).
Remove the upper oil pan. Refer to Removal and Installation (Upper Oil Pan).
Remove the timing chain. Refer to Removal and Installation.
Remove oil pump assembly.
INSTALLATION
Installation is in the reverse order of removal.

| 1. | Oil pump housing | 2. | Outer pump outer rotor | 3. | Oil pump inner rotor |
| 4. | Oil pump cover | 5. | Regulator valve set assembly | 6. | Regulator valve plug |
| 7. | Regulator valve spring | 8. | Regulator valve spring | 9. | Regulator valve |
| 10. | Regulator valve O-ring | 11. | Oil strainer | Engine front |
DISASSEMBLY
Remove the oil pump cover.
Remove inner rotor and outer rotor from oil pump housing.
Remove oil strainer from oil pump housing.
After removing regulator plug, remove spring and regulator valve.
INSPECTION AFTER DISASSEMBLY
Clearance of Oil Pump Parts
Measure clearance using suitable tool (A).

Clearance between outer rotor and oil pump body (position 1).
Standard : Refer to Oil Pump. Tip clearance between inner rotor and outer rotor (position 2).
Standard : Refer to Oil Pump.
Measure clearance using suitable tools (A/B).

Side clearance between inner rotor and oil pump body (position 3).
Standard : Refer to Oil Pump. Side clearance between outer rotor and oil pump body (position 4).
| Standard | : Refer to Oil Pump. |
Calculate the clearance between inner rotor (1) and oil pump body as follows:
Measure the outer diameter of protruded portion of inner rotor (position A).

Measure the inner diameter of oil pump body with inside micrometer (position B).
(clearance 5) = (inner diameter of oil pump body B) – (outer diameter of inner rotor A)
| Standard | : Refer to Oil Pump. |
If out of specifications, replace oil pump assembly.
Regulator Valve
Visually inspect components for wear and damage, including regulator plug (C).

Check oil pressure regulator valve (A) sliding surface and valve spring (B).
Coat regulator valve with engine oil. Check that it falls smoothly into the valve hole by its own weight.
If damaged, replace oil pump assembly.
Regulator Valve Clearance
(Clearance 6) = D (Valve hole diameter) – E (Outer diameter of valve)

| Standard | : Refer to Regulator Valve. |
- : Regulatory valve
- : Oil pump body
If it exceeds the standard, replace the oil pump assembly.
Assembly
Assembly is in the reverse order of disassembly.
Assemble the outer rotor in the correct vane orientation to rotation as noted during disassembly and the inner rotor with the groove on the oil pump cover side.

| (A) | : Housing side |
| (B) | : Cover side |
| (C) | : Groove |