Body Exterior, Doors, Roof & Vehicle Security
Power Window and Door Lock/unlock Switch Rh
In this manual: Body Exterior, Doors, Roof & Vehicle Security
9steps
~54min
2/5difficulty
Done 0 of 9
CHECK POWER SUPPLY
Ignition switch OFF.
Disconnect power window and door lock/unlock switch RH connector.
Ignition switch ON.
Check voltage between power window and door lock/unlock switch RH harness connector and ground.
| (+) | (–) | Voltage (Approx.) | |
|---|---|---|---|
| Power window and door lock/unlock switch RH | |||
| Connector | Terminal | ||
| D105 | 8 | Ground | Battery voltage |
Is the inspection result normal?
YES>>GO TO 3.
NO>>GO TO 2.
CHECK POWER SUPPLY CIRCUIT
Ignition switch OFF.
Disconnect BCM connector.
Check continuity between BCM harness connector and power window and door lock/unlock switch RH harness connector.
BCM Power window and door lock/unlock switch RH Continuity Connector Terminal Connector Terminal M81 141 D105 8 Yes
Is the inspection result normal?
YES>>Replace BCM. Refer to Removal and Installation.
NO>>Repair or replace harness.
CHECK GROUND CIRCUIT
Ignition switch OFF.
Check continuity between power window and door lock/unlock switch RH harness connector and ground.
| Power window and door lock/unlock switch RH | Ground | Continuity | |
| Connector | Terminal | ||
| D105 | 7 | Yes | |
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace harness.
CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
>>Inspection End.
Was this page helpful?