Body Exterior, Doors, Roof & Vehicle Security

Sunshade Motor Assembly

15steps
~90min
4/5difficulty
Done 0 of 15
Description
  • BCM supplies the sunshade motor assembly with power.

  • CPU is integrated in sunshade motor assembly.

  • Slide open/close controlled by the sunshade switch operation.

Component Function Check

CHECK SUNSHADE MOTOR FUNCTION

Does the slide open and close functions operate normally with the sunshade switch?

Is the inspection result normal?

YES>>

Sunshade motor assembly is OK.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK POWER SUPPLY

  1. Ignition switch OFF.

  2. Disconnect sunshade motor assembly connector.

  3. Ignition switch ON.

  4. Check voltage between sunshade motor assembly harness connector and ground.

    (+)(–)

    Voltage

    (Approx.)
    Sunshade motor assembly
    ConnectorTerminal
    R5 1 Ground Battery voltage

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the harness.

CHECK GROUND CIRCUIT

  1. Ignition switch OFF.

  2. Check continuity between sunshade motor assembly harness connector and ground.

    Sunshade motor assembly—Continuity
    ConnectorTerminal
    R5 5 Ground Yes

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the harness.

CHECK SUNSHADE SWITCH INPUT SIGNAL

  1. Ignition switch ON.

  2. Check voltage between the moonroof motor assembly harness connector and ground.

    (+)(–)Condition

    Voltage

    (Approx.)
    Moonroof motor assembly
    ConnectorTerminals
    R4 3 Ground

    Moonroof switch is operated

    SLIDE OPEN
    0 V
    Other than above Battery voltage
    2

    Moonroof switch is operated

    SLIDE CLOSE
    0 V
    Other than above Battery voltage

Is the inspection result normal?

YES>>

GO TO 6.

NO>>

GO TO 4.

CHECK SUNSHADE SWITCH CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect the moonroof motor assembly connector and sunshade switch connector.

  3. Check continuity between the moonroof motor assembly harness connector and sunshade switch harness connector.

    Moonroof motor assemblySunshade switchContinuity
    ConnectorTerminalConnectorTerminal
    R4 3 R99 2 Yes
    2 1
  4. Check continuity between the moonroof motor assembly harness connector and ground.

    Moonroof motor assembly—Continuity
    ConnectorTerminal
    R4 2 Ground No
    3

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace harness.

CHECK MOONROOF SWITCH GROUND CIRCUIT

Check continuity between the sunshade switch harness connector and ground.

Sunshade switch—Continuity
ConnectorTerminal
R99 4 Ground Yes

Is the inspection result normal?

YES>>

Refer to Component Inspection.

NO>>

Repair or replace harness.

CHECK SUNSHADE MOTOR ASSEMBLY COMMUNICATION SIGNAL

  1. Disconnect moonroof motor assembly connector.

  2. Check continuity between sunshade motor assembly harness connector and moonroof motor assembly harness connector.

    Moonroof motor assemblySunshade motor assemblyContinuity
    ConnectorTerminalConnectorTerminal
    R4 9 R5 9 Yes
  3. Check continuity between the moonroof motor assembly harness connector and ground.

    Moonroof motor assembly—Continuity
    ConnectorTerminal
    R4 9 Ground No

Is the inspection result normal?

YES>>

Replace sunshade motor assembly. Refer to Removal and Installation.

NO>>

Repair or replace harness.