Driver Information & Multimedia

Symptom Diagnosis. Intelligent Around View Monitor System

~2min read
Symptom Table

INTELLIGENT AROUND VIEW MONITOR SYSTEM

SymptomCheck itemsProbable malfunction location
Screen is not switched to camera image when CAMERA button is pressed or when shift position is shifted to “R”. “AVM” is not displayed on the system selection screen of CONSULT. Around view monitor control unit power supply or ground circuit. Refer to Diagnosis Procedure.

Check that Data Monitor item values are normal using CONSULT:

  • CAMERA SWITCH SIGNAL

  • REVERSE SIGNAL

CAMERA SWITCH SIGNAL and REVERSE SIGNAL are normal. Around view monitor control unit. Refer to Removal and Installation.
CAMERA SWITCH SIGNAL is not normal. CAN communication circuit. Refer to Trouble Diagnosis Flow Chart.
REVERSE SIGNAL is not normal. Reverse signal circuit. Refer to Reference Value.
  • Front-side view screen is not displayed.

  • Front of birds-eye view is not displayed.

Check the following Data Monitor item using CONSULT:

  • F-CAMERA IMAGE SIGNAL

F-CAMERA IMAGE SIGNAL: NG

Front camera power supply circuit and image signal circuit.

Refer to Diagnosis Procedure.
  • The rear view screen is not displayed.

  • Rear of birds-eye view is not displayed.

Check the following Data Monitor item using CONSULT:

  • REAR CAMERA IMAGE SIGNAL

REAR CAMERA IMAGE SIGNAL: NG

Rear camera power supply circuit and image signal circuit.

Refer to Diagnosis Procedure.
LH side of birds-eye view is not displayed.

Check the following Data Monitor item using CONSULT:

  • DR-SIDE CAMERA IMAGE SIGNAL

DR-SIDE CAMERA IMAGE SIGNAL: NG

Side camera LH power supply circuit and image signal circuit.

Refer to Diagnosis Procedure.
RH side of birds-eye view is not displayed.

Check the following Data Monitor item using CONSULT:

  • PA-SIDE CAMERA IMAGE SIGNAL

PA-SIDE CAMERA IMAGE SIGNAL: NG Side camera RH power supply circuit and image signal circuit. Refer to Diagnosis Procedure.