Brakes
Vacuum Lines
In this manual: Brakes
~1min read

| 1. | Clamp | 2. | Vacuum hose | 3. | Vacuum pipe |
| 4. | Clip | 5. | Vacuum hose | 6. | Check valve |
| A. | To intake manifold collector. Refer to Exploded View. | Front |
REMOVAL
Remove the sub tank bracket nuts (A), release the brake fluid level switch harness clips (B) and position the sub tank assembly (1) aside.

Remove the air cleaner case as an assembly. Refer to Exploded View.
Remove the engine room cover. Refer to Removal and Installation.
If necessary, remove the check valve from the brake booster.
Disconnect the vacuum hose from the check valve.
Disconnect the vacuum hose from the intake manifold collector.
Disconnect the clips from vacuum pipe.
Remove the vacuum hoses and the vacuum pipe.
INSPECTION AFTER REMOVAL
Check for correct installation, damage and deterioration of the vacuum hoses and pipe.
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?