Opel Corsa Quiz
Bodywork and fittings

Rear trim panel - removal and refitting

In this manual: Bodywork and fittings
Routine maintenance and servicing — 18OHV engine — 17OHC engines — 14DOHC (16-valve) engine — 12Cooling, heating and ventilation systems — 10Fuel and exhaust systems - carburettor models — 25Fuel and exhaust systems - fuel-injected models — 12Starting and charging systems — 9Contact breaker ignition system — 10Electronic (breakerless) ignition systems — 8Braking system — 23Suspension and steering — 25Bodywork and fittings — 21Body electrical system — 21Wiring diagrams — 1Reference — 25
~1min read

Removal

1.Remove the number plate lamps.

2.Inside the car, free the soft trim from the rear panel to expose the two securing nuts (see illustration). Remove the nuts.

Bodywork and fittings
Rear trim panel securing nut

3. Remove the two screws from inside each wheel arch to free the ends of the rear trim panel (see illustration). Withdraw the panel, disconnecting the rear foglight wires as it is withdrawn.

Bodywork and fittings
Freeing one end of the rear trim panel - screw holes arrowed

Refitting

4. Refit in the reverse order to removal.

Test yourself

A quick Opel Corsa quiz: every answer comes with an explanation and a link to the manual page.