Opel Corsa Quiz
Bodywork and fittings

Wind deflector - removal and refitting

In this manual: Bodywork and fittings
Routine maintenance and servicing — 18OHV engine — 17OHC engines — 14DOHC (16-valve) engine — 12Cooling, heating and ventilation systems — 10Fuel and exhaust systems - carburettor models — 25Fuel and exhaust systems - fuel-injected models — 12Starting and charging systems — 9Contact breaker ignition system — 10Electronic (breakerless) ignition systems — 8Braking system — 23Suspension and steering — 25Bodywork and fittings — 21Body electrical system — 21Wiring diagrams — 1Reference — 25
~1min read

Removal

1. The wind deflector fills the gap between the rear of the bonnet and the base of the windscreen.

2. Remove both windscreen wiper arms.

3. Remove the wind deflector securing screws (see illustrations).

Bodywork and fittings
Wind deflector screw at the wing

Bodywork and fittings
Wind deflector screw near the wiper

4. Free the wind deflector from its clips and remove it. Disconnect the windscreen washer hoses as it is withdrawn.

5. The two halves of the wind deflector can be separated if wished by pulling them apart.

Each half may also be removed individually, leaving the other in place.

Refitting

6. Refit in the reverse order to removal.

Test yourself

A quick Opel Corsa quiz: every answer comes with an explanation and a link to the manual page.