Towing another vehicle

Detach the cap at the bottom and remove it from below.

The towing eye is located in the vehicle tool kit 230.

Screw the towing eye in as far as it will go, until it is in the horizontal position.

The tie-down ring located at the rear underneath the vehicle must under no circumstances be used as a towing eye.

Attach a towing cable or, better, a tow bar to the towing eye.

The towing eye must only be used for towing and not for recovering a stuck vehicle.

Notice

Start slowly. Do not drive in jerks. Excessive traction forces can damage the vehicles.

After towing, unscrew the towing eye.

Insert the cap from below, turn it gently clockwise and engage the cap.