Access to the spare wheel (Hatchback)

The spare wheel is stored in the luggage compartment under the floor.

To access it, read the section "Access to the tools" on the previous page.

Fitting the spare wheel on a steel wheel If the vehicle is fitted with alloy wheels, it is normal that when tightening the bolts while fitting the wheel, the caps do not touch the steel wheel. The wheel is held by the conical pressure of each bolt.

Removing the wheel

• Loosen the central yellow bolt.
• Lift the spare wheel by pulling it towards you.
• Remove the wheel from the luggage compartment.

Stowing the wheel

• Place the wheel in its position.
• Unscrew the central yellow bolt by a few turns, then fit the bolt into the centre of the wheel.
• Fully tighten the central bolt until it clicks, to secure the wheel.

• Return the toolbox to its place.
• Cover with the floor mat.