Warning lamps

Visual signals inform the driver that a system has been switched on (operation or deactivation lamps) or that a fault has occurred (warning lamp).

After switching on the ignition

Some warning lamps light up for a few seconds when the ignition is switched on.

After starting the engine, these lamps should go out.

If they remain lit before setting off, find out what the warning means.

Related warnings

The illumination of some warning lamps may be accompanied by an audible signal and a message on the multifunction display.

Operation indicator lamps

Illumination of one of the following lamps confirms that the corresponding system is switched on.

A warning lamp may light up constantly or flash.

Some warning lamps may have two signalling modes. Only by relating the lamp signal to the vehicle's operating condition can you tell whether the situation is normal or a fault has occurred.

Deactivation indicator lights

When one of the following warning lights comes on, it confirms that the corresponding system has been manually deactivated.

This may be accompanied by a warning tone and a message on the multifunction display.

Warning lights

When one of the following warning lights comes on while the engine is running or while driving, it indicates a fault that requires driver action.

Any fault that lights a warning lamp requires further diagnosis by reading the message shown on the multifunction display.

If in doubt, contact a PEUGEOT dealer or a specialist workshop.