Load cover (SW)

It consists of three parts that fold on top of each other.

To store it, fold it and stand it upright at the back of the luggage compartment.

To fold it from the luggage compartment:

• grasp the load cover by strap A,
• fold it concertina-style up to the rear seat.

To extend it from the luggage compartment:

• grasp the load cover by strap A,
• extend it up to the tailgate pillars.

To access it from the rear seats:

• lift the front edge of the luggage cover using handle B.

Maximum load 7.5 kg, with the load cover extended and the high-object retaining net in the 2nd row.

12 V accessory socket (SW)

• To connect a 12 V accessory (maximum power: 120 W), remove the cap and connect the appropriate power adapter.
• Turn the key to the ignition position.

High-object retaining net (SW)

Attached to the upper anchorages and ISOFIX anchor points or to the protrusions, it allows use of the full luggage compartment space up to the roof:

• behind the rear seats (2nd row),
• behind the front seats (1st row) when the rear seats are folded.

When setting up the net, check that the strap buckles are visible from the luggage compartment; this makes it easier to handle them and to loosen or tension the straps.

To use the net in the 1st row:

• open the upper anchorage caps 1 ,
• unroll the high-object retaining net,
• hook one end of the net's metal bar into the corresponding upper anchorage 1 , then do the same on the other side,
• fully extend the straps,
• attach the snap hook on each strap to the corresponding protrusion 3 located under the rear seat cushion,
• fold down the rear seats,
• tension the straps without lifting the rear seat,
• check that the net is correctly fixed and tensioned.

To use the net in the 2nd row:

• fold or extract the load cover,
• open the caps of the upper anchorages 2 ,
• unroll the high-object retaining net,
• Hook one end of the metal net bar into the corresponding upper anchorage 2, then do the same on the other side.
• Attach the hook of each net strap to the corresponding ISOFIX anchorage 4.
• Tension the straps.
• Check that the net is properly secured and taut.