Tyre inflation pressures

Label A

To read it, open the driver’s door.

Inflation pressures must be checked on cold tyres.

If the pressure cannot be checked on cold tyres, increase the indicated pressures by 0.2 to 0.3 bar (or 3 PSI). Never deflate a hot tyre.

B: tyre size fitted to the vehicle. C: intended speed rating.

D: pressure recommended to optimise fuel consumption.

Note: ride comfort may be affected.

E: front tyre inflation pressure. F: rear tyre inflation pressure.

G: inflation pressure of the spare wheel.

Special case for vehicles used at full load (Maximum Authorised Gross Vehicle Weight) and towing a trailer: the maximum speed must be limited to 100 km/h and the tyre pressures increased by 0.2 bar.

Refer to the “Weights” section of chapter 6.

Tyre safety and fitting snow chains: refer to the “Tyres” section of chapter 5 for maintenance conditions and, depending on version, the conditions for fitting snow chains to the vehicle.

If the tyres need to be replaced, only fit tyres of the same make, size, type and construction on the same axle.

They must either be identical to the original ones, or match those recommended by a brand Representative.